API 5L X42 Carbon Steel Seamless Pipes & Tubes


This specification covers seamless and welded steel line pipe. It includes standard-weight and extra-strong threaded line pipe. It includes standard-weight and extra-strong threaded line pipe; and standard-weight plain-end, regular-weight plain-end, special plain-end, extra-strong plain-end, special plain-end, extra-strong plain-end pipe; as as well as bell and spigot and through-the-flow line(TFL) pipe.

The purpose of this specification is to provide standards for pipe suitable for use in conveying gas, water, and oil in both the oil and natural gas industries.

  • Sizes (Seamless): 1/2" NB - 60" NB
  • Sizes (ERW): 1/2" NB - 24" NB
  • Sizes (SAW): 16" NB - 100" NB

Wall Thickness available:
Schedule 20 - Schedule XXS (heavier on request) up to 250 mm thk.



Additional Testing :
NACE MR0175, NACE TM0177, NACE TM0284, HIC TEST, SSC TEST, H2 SERVICE, IBR, etc.

Dimensions :
All Pipe is manufactured and inspected/tested to the relevant standards including ASTM, ASME, API.

Chemical Composition :
The composition of pipe furnished to this specification, as determined by heat analysis for pipe other than Grade X 80, shall conform to the chemical requirements specified in Table 2, except that by agreement between the purchaser and the manufacturer carbon contents higher than those specified may be used. the composition of intermediate grades(higher than X42)shall conform to chenical requirements agreed upon between the manufacturer and the purchaser, and such requirements shall be consistent with the requirements specified in Table 2 for the applicable type of pipe For Grades X42 and higher, by agreement between the purchaser and the manufacturer, element other than columbium, vanadium, and titanium may be used; however, caution should be exercised in determining the quantity that may be present for any particular size and thickness of pipe because the addition of such otherwise desirable elements may alter the weldability of the pipe.

API 5L Line Pipe Physical Properties
Line pipe grade designations come from API Spec 5L Specification for Line Pipe. Standard Line Pipe has grade designation A and B. Stronger grades have the designation X followed by the specified minimum yield strength of the pipe steel, measured in kilopounds per square inch (abbreviated ksi), e.g. X60 for pipe having a minimum yield strength of 60 ksi. See the table below for the standard available grades.

Line Pipe Physical Properties

1 -API 5L elongation figures vary with specimen dimensions. Values shown for 0.2 sq. in. specimen.

Line pipe mechanical testing usually omits Reduction of Area (RA) measurement reporting, and Charpy V-Notch (CVN) testing. This prevents use of this pipe as body material above 36 ksi yield strength for API Spec 6A equipment without retesting for Reduction of Area, and in the case of low temperature service, Charpy V-Notch testing as well.
API 5L Grade B, x42, x46, x52, x56, x56, x60, x70 Carbon Steel Seamless Pipe Packing

API 5L Grade B, x42, x46, x52, x56, x56, x60, x70 Carbon Steel Seamless Pipe is sleeved into plastic bag individually, pieces wrapped with water-proof material, bundled with nylon rope. Clear labels are tagged on the outside of the package for easy identification of the quantity and product I.D. Great care is taken during operation and transportation.

API 5L Grade B, x42, x46, x52, x56, x56, x60, x70 Carbon Steel Seamless Pipee packing will be according to international standard in bundles strapped by strips then into containers to avoid any damage.

Delivery :

Within 10-25days or asap if we have enough stock

Types of Packaging:

  • Bundles (hexagonal)
  • Wooden Boxes
  • Crates (steel/wooden)
  • Special crates for U-Bend tubes with each radius separated
  • Packaging for API 5L Grade B, x42, x46, x52, x56, x56, x60, x70 Carbon Steel Seamless Pipe Seamless Pipe as per customer's requirements

Special Features:

  • Each bundle covered with plastic for protection against extreme weather.
  • End of API 5L Grade B, x42, x46, x52, x56, x56, x60, x70 Carbon Steel Seamless Pipe protected by plastic caps.
  • Bundles strapped with plastic strips.
  • Each radius of U-Bend tube separated by a separator.
  • Packaging list (laminated) placed with box/crate.

Industries We Serve

  • Beverage Industries
  • Power Industries
  • textile Industries
  • Engineering Industries
  • cement Industries
  • pharma Industries
  • Petrochemical Industries
  • Aerospace Industries
  • Petroleum Industries
  • Metalworking Industries
  • Paper Industries
  • suger Industries

We provide best consulting services. Meet our Experts and Get Free Consulting! Contact Now